Communication between the stem cell niche and an adjacent differentiation niche through miRNA and EGFR signaling orchestrates exit from the stem cell state in the Drosophila ovary.

The signaling environment, or niche, often governs the initial difference in behavior of an adult stem cell and a derivative that initiates a path towards differentiation. The transition between an instructive stem cell niche and differentiation niche must generally have single-cell resolution, suggesting that multiple mechanisms might be necessary to sharpen the transition. Here, we examined the Drosophila ovary and found that Cap cells, which are key constituents of the germline stem cell (GSC) niche, express a conserved microRNA (miR-124). Surprisingly, loss of miR-124 activity in Cap cells leads to a defect in differentiation of GSC derivatives. We present evidence that the direct functional target of miR-124 in Cap cells is the epidermal growth factor receptor (EGFR) and that failure to limit EGFR expression leads to the ectopic expression of a key anti-differentiation BMP signal in neighboring somatic escort cells (ECs), which constitute a differentiation niche. We further found that Notch signaling connects EFGR activity in Cap cells to BMP expression in ECs. We deduce that the stem cell niche communicates with the differentiation niche through a mechanism that begins with the selective expression of a specific microRNA and culminates in the suppression of the major anti-differentiation signal in neighboring cells, with the functionally important overall role of sharpening the spatial distinction between self-renewal and differentiation environments.

Porous Waterborne Polyurethane Films Templated from Pickering Foams for Fabrication of Synthetic Leather.

Waterborne polyurethane (WPU) latex nanoparticles with proven interfacial activity were utilized to stabilize air-water interfaces of Pickering foams through interfacial interaction with hydrophobic fumed silica particles (SPs). The rheological properties of the Pickering foam were tailored through adjustment of their SP content, which influenced their formability and stability. A Pickering foam stabilized with WPU and SPs was used as a template to prepare a WPU-SP composite porous film. The as-prepared film had intact open-cell porous structures, which increased its water absorption and water-vapor permeability. The porous film was used as a middle layer in the preparation of synthetic leather via a four-step "drying method". Compared with commercial synthetic leather, the lab-made synthetic leather with a middle layer made of the WPU-SP composite porous film exhibited a richer porous structure, acceptable wetting on a fabric substrate, a thicker porous layer, and higher water-vapor permeability. This work provides a novel and facile approach for preparing WPU-SP Pickering foams. Furthermore, the foams have the potential to function as a sustainable material for creating a porous-structured synthetic leather made from WPU, which may be utilized as an alternative to solvent-based synthetic leather.

Single-cell expression profile of Drosophila ovarian follicle stem cells illuminates spatial differentiation in the germarium.

BACKGROUND: How stem cell populations are organized and regulated within adult tissues is important for understanding cancer origins and for developing cell replacement strategies. Paradigms such as mammalian gut stem cells and Drosophila ovarian follicle stem cells (FSC) are characterized by population asymmetry, in which stem cell division and differentiation are separately regulated processes. These stem cells behave stochastically regarding their contributions to derivative cells and also exhibit dynamic spatial heterogeneity. Drosophila FSCs provide an excellent model for understanding how a community of active stem cells maintained by population asymmetry is regulated. Here, we use single-cell RNA sequencing to profile the gene expression patterns of FSCs and their immediate derivatives to investigate heterogeneity within the stem cell population and changes associated with differentiation. RESULTS: We describe single-cell RNA sequencing studies of a pre-sorted population of cells that include FSCs and the neighboring cell types, escort cells (ECs) and follicle cells (FCs), which they support. Cell-type assignment relies on anterior-posterior (AP) location within the germarium. We clarify the previously determined location of FSCs and use spatially targeted lineage studies as further confirmation. The scRNA profiles among four clusters are consistent with an AP progression from anterior ECs through posterior ECs and then FSCs, to early FCs. The relative proportion of EC and FSC clusters are in good agreement with the prevalence of those cell types in a germarium. Several genes with graded profiles from ECs to FCs are highlighted as candidate effectors of the inverse gradients of the two principal signaling pathways, Wnt and JAK-STAT, that guide FSC differentiation and division. CONCLUSIONS: Our data establishes an important resource of scRNA-seq profiles for FSCs and their immediate derivatives that is based on precise spatial location and functionally established stem cell identity, and facilitates future genetic investigation of regulatory interactions guiding FSC behavior.

Metabolomics Provides New Insights into Host Manipulation Strategies by Asobara japonica (Hymenoptera: Braconidae), a Fruit Fly Parasitoid.

Asobara japonica (Hymenoptera: Braconidae) is an endoparasitoid wasp that can successfully parasitize a wide range of host species across the Drosophila genus, including the invasive crop pest Drosophila suzukii. Parasitoids are capable of regulating the host metabolism to produce the nutritional metabolites for the survival of their offspring. Here, we intend to investigate the metabolic changes in D. melanogaster hosts after parasitization by A. japonica, using the non-targeted LC-MS (liquid chromatography-mass spectrometry) metabolomics analysis. In total, 3043 metabolites were identified, most of which were not affected by A. japonica parasitization. About 205 metabolites were significantly affected in parasitized hosts in comparison to non-parasitized hosts. The changed metabolites were divided into 10 distinct biochemical groups. Among them, most of the lipid metabolic substances were significantly decreased in parasitized hosts. On the contrary, most of metabolites associated with the metabolism of amino acids and sugars showed a higher abundance of parasitized hosts, and were enriched for a wide range of pathways. In addition, eight neuromodulatory-related substances were upregulated in hosts post A. japonica parasitization. Our results reveal that the metabolites are greatly changed in parasitized hosts, which might help uncover the underlying mechanisms of host manipulation that will advance our understanding of host-parasitoid coevolution.

The vitellogenin receptor gene contributes to mating and host-searching behaviors in parasitoid wasps.

Vitellogenin receptor (VgR) is essential to vitellogenin uptaking and dominates ovary maturation in insects. However, the function of VgR in parasitoid wasps is largely unknown. Here, we applied the Drosophila parasitoid Leptopilina boulardi as a study model to investigate the function of VgR in parasitoids. Despite the conserved sequence characteristics with other insect VgRs, we found L. boulardi VgR (LbVgR) gene was highly expressed in head but lower in ovary. In addition, we found that LbVgR had no effects on ovary development, but participated in host-searching behavior of female L. boulardi and mating behavior of male L. boulardi. Comparative transcriptome analysis further revealed LbVgR might play crucial roles in regulating the expression of some important chemoreception genes to adjust the parasitoid behaviors. These results will broaden our knowledge of the function of VgR in insects, and contribute to develop advanced pest management strategies using parasitoids as biocontrol agents.

Injectable magnesium oxychloride cement foam-derived scaffold for augmenting osteoporotic defect repair.

HYPOTHESIS: Cement augmentation has been widely applied to promote osteoporotic fracture healing, whereas the existing calcium-based products suffer from the excessively slow degradation, which may impede bone regeneration. Magnesium oxychloride cement (MOC) shows promising biodegradation tendency and bioactivity, which is expected to be a potential alternative to the classic calcium-based cement for hard-tissue-engineering applications. EXPERIMENTS: Here, a hierarchical porous MOC foam (MOCF)-derived scaffold with favorable bio-resorption kinetic and superior bioactivity is fabricated through Pickering foaming technique. Then, a systematic characterization in terms of material properties and in vitro biological performance have been conducted to evaluate the feasibility of the as-prepared MOCF scaffold to be a bone-augmenting material for treating osteoporotic defects. FINDINGS: The developed MOCF shows excellent handling performance in the paste state, while exhibiting sufficient load-bearing capacity after solidification. In comparison with the traditional bone cement, calcium deficient hydroxyapatite (CDHA), our porous MOCF scaffold demonstrates a much higher biodegradation tendency and better cell recruitment ability. Additionally, the eluted bioactive ions by MOCF commits to a biologically inductive microenvironment, where the in vitro osteogenesis is significantly enhanced. It is anticipated that this advanced MOCF scaffold will be competitive for clinical therapies to augment osteoporotic bone regeneration.

Search performance and octopamine neuronal signaling mediate parasitoid induced changes in Drosophila oviposition behavior.

Making the appropriate responses to predation risk is essential for the survival of an organism; however, the underlying mechanisms are still largely unknown. Here, we find that Drosophila has evolved an adaptive strategy to manage the threat from its parasitoid wasp by manipulating the oviposition behavior. Through perception of the differences in host search performance of wasps, Drosophila is able to recognize younger wasps as a higher level of threat and consequently depress the oviposition. We further show that this antiparasitoid behavior is mediated by the regulation of the expression of Tdc2 and Tßh in the ventral nerve cord via LC4 visual projection neurons, which in turn leads to the dramatic reduction in octopamine and the resulting dysfunction of mature follicle trimming and rupture. Our study uncovers a detailed mechanism underlying the defensive behavior in insects that may advance our understanding of predator avoidance in animals.

The Dual Functions of a Bracovirus C-Type Lectin in Caterpillar Immune Response Manipulation.

Parasitoids are widespread in natural ecosystems and normally equipped with diverse viral factors to defeat host immune responses. On the other hand, parasitoids can enhance the antibacterial abilities and improve the hypoimmunity traits of parasitized hosts that may encounter pathogenic infections. These adaptive strategies guarantee the survival of parasitoid offspring, yet their underlying mechanisms are poorly understood. Here, we focused on Cotesia vestalis, an endoparasitoid of the diamondback moth Plutella xylostella, and found that C. vestalis parasitization decreases the number of host hemocytes, leading to disruption of the encapsulation reaction. We further found that one bracovirus C-type lectin gene, CvBV_28-1, is highly expressed in the hemocytes of parasitized hosts and participates in suppressing the proliferation rate of host hemocytes, which in turn reduces their population and represses the process of encapsulation. Moreover, CvBV_28-1 presents a classical bacterial clearance ability via the agglutination response in a Ca2+-dependent manner in response to gram-positive bacteria. Our study provides insights into the innovative strategy of a parasitoid-derived viral gene that has dual functions to manipulate host immunity for a successful parasitism.

Water-in-oil high internal phase Pickering emulsions formed by spontaneous interfacial hydrolysis of monomer oil.

HYPOTHESIS: Alcohols can strongly reduce the interfacial tension between immiscible liquids, thus facilitating the formation of emulsions. By combining non-surface-active hydrophobic particles with medium-chain alcohols, stable water-in-oil (w/o) high internal phase Pickering emulsions (HIPPEs) can be easily prepared without high-energy emulsification methods. EXPERIMENTS: The emulsions containing acrylate monomer as the oil phase were prepared at different pH values in the presence of hydrophobic silica particles. Further, by replacing monomer oil with organic solvents (e.g., toluene) and a certain concentration of alcohol, the promoted particle adsorption at the oil-water interface has been systematically investigated. The morphology and interfacial structure of HIPPEs were visualized by confocal laser scanning microscopy (CLSM). FINDING: At high pH, stable water-in-acrylate monomer HIPPEs can be formed using commercial fumed silica nanoparticles alone with simple stirring or vortexing. The hydrolysis of the acrylate group at high pH can generate alcohols in situ which adsorb at the oil-water interface to reduce the interfacial tension and promote particle adsorption to hinder droplet coalescence. The novel strategy for forming stable and processable HIPPEs can be universally applied to different hydrophobic silica particles with the help of various alcohols as the co-stabilizer, which provides a flexible approach for the fabrication of lightweight, closed-cell solid foams for a range of applications.

Neofunctionalization of an ancient domain allows parasites to avoid intraspecific competition by manipulating host behaviour.

Intraspecific competition is a major force in mediating population dynamics, fuelling adaptation, and potentially leading to evolutionary diversification. Among the evolutionary arms races between parasites, one of the most fundamental and intriguing behavioural adaptations and counter-adaptations are superparasitism and superparasitism avoidance. However, the underlying mechanisms and ecological contexts of these phenomena remain underexplored. Here, we apply the Drosophila parasite Leptopilina boulardi as a study system and find that this solitary endoparasitic wasp provokes a host escape response for superparasitism avoidance. We combine multi-omics and in vivo functional studies to characterize a small set of RhoGAP domain-containing genes that mediate the parasite's manipulation of host escape behaviour by inducing reactive oxygen species in the host central nervous system. We further uncover an evolutionary scenario in which neofunctionalization and specialization gave rise to the novel role of RhoGAP domain in avoiding superparasitism, with an ancestral origin prior to the divergence between Leptopilina specialist and generalist species. Our study suggests that superparasitism avoidance is adaptive for a parasite and adds to our understanding of how the molecular manipulation of host behaviour has evolved in this system.

Comparative transcriptome analysis reveals a potential mechanism for host nutritional manipulation after parasitization by Leptopilina boulardi.

Parasitoids have been extensively found to manipulate nutrient amounts of their hosts to benefit their own development and survival, but the underlying mechanisms are largely unknown. Leptopilina boulardi (Hymenoptera: Figitidae) is a larval-pupal endoparasitoid wasp of Drosophila melanogaster whose survival relies on the nutrients provided by its Drosophila host. Here, we used RNA-seq to compare the gene expression levels of the host midgut at 24 h and 48 h post L. boulardi parasitization. We obtained 95 and 191 differentially expressed genes (DEGs) in the parasitized host midgut at 24 h and 48 h post L. boulardi parasitization, respectively. A KEGG analysis revealed that several metabolic pathways were significantly enriched in the upregulated DEGs, and these pathways included "starch and sucrose metabolism" and "galactose metabolism". A functional annotation analysis showed that four classes of genes involved in carbohydrate digestion process had increased expression levels in the midgut post L.boulardi parasitization than nonparasitized groups: glucosidase, mannosidase, chitinase and amylase. Genes involved in protein digestion process were also found among the DEGs, and most of these genes, which belonged to the metallopeptidase and serine-type endopeptidase families, were found at higher expression levels in the parasitized host midgut comparing with nonparasitized hosts. Moreover, some immune genes, particularly those involved in the Toll and Imd pathways, also exhibited high expression levels after L.boulardi parasitization. Our study provides large-scale transcriptome data and identifies sets of DEGs between parasitized and nonparasitized host midgut tissues at 24 h and 48 h post L. boulardi parasitization. These resources help improve our understanding of how parasitoid infection affects the nutrient components in the hosts.

Two novel venom proteins underlie divergent parasitic strategies between a generalist and a specialist parasite.

Parasitoids are ubiquitous in natural ecosystems. Parasitic strategies are highly diverse among parasitoid species, yet their underlying genetic bases are poorly understood. Here, we focus on the divergent adaptation of a specialist and a generalist drosophilid parasitoids. We find that a novel protein (Lar) enables active immune suppression by lysing the host lymph glands, eventually leading to successful parasitism by the generalist. Meanwhile, another novel protein (Warm) contributes to a passive strategy by attaching the laid eggs to the gut and other organs of the host, leading to incomplete encapsulation and helping the specialist escape the host immune response. We find that these diverse parasitic strategies both originated from lateral gene transfer, followed with duplication and specialization, and that they might contribute to the shift in host ranges between parasitoids. Our results increase our understanding of how novel gene functions originate and how they contribute to host adaptation.

Ultra-stable aqueous foams induced by interfacial co-assembly of highly hydrophobic particles and hydrophilic polymer.

HYPOTHESIS: Interfacial assembly between nanoparticles and complementary ligands can in-situ generate Janus-like particles, rendering high stability of a Pickering-based system. Hence, through the self-assembly and formation of a Janus structure at the air/water interface, which is composed of a hydrophobic particle layer in the inner air phase and then a hydrophilic polymer layer in the aqueous phase, it should be possible to fabricate ultra-stable Pickering foams. EXPERIMENTS: Foams containing different highly hydrophobic particles and hydrophilic polymers or microgels were prepared, and their stability was investigated. The interfacial structure of the Pickering bubbles was examined, where a new mechanism for ultra-stable foam formation was established. The properties of the foams were further demonstrated. FINDINGS: The interfacial co-assembly exploiting binary foam stabilizers being very hydrophobic particles and a hydrophilic polymer/particle results in the formation of ultra-stable Pickering foams. The generation of a Janus bilayer at the interface is the key factor responsible for their high stability. This strategy can be universally applied to any kind of highly hydrophobic particle with various hydrophilic polymers or colloids. The obtained foams demonstrate excellent tunability and plasticity, which could be used for mold-casting and printing.

Pickering emulsions: Versatility of colloidal particles and recent applications.

The versatility of colloidal particles endows the particle stabilized or Pickering emulsions with unique features and can potentially enable the fabrication of a wide variety of derived materials. We review the evolution and breakthroughs in the research on the use of colloidal particles for the stabilization of Pickering emulsions in recent years for the particle categories of inorganic particles, polymer-based particles, and food-grade particles. Moreover, based on the latest works, several emulsions stabilized by the featured particles and their derived functional materials, including enzyme immobilized emulsifiers for interfacial catalysis, 2D colloidal materials stabilized emulsions as templates for porous materials, and Pickering emulsions as adjuvant formulations, are also summarized. Finally, we point out the gaps in the current research on the applications of Pickering emulsions and suggest future directions for the design of particulate stabilizers and preparation methods for Pickering emulsions and their derived materials.

Development of a novel biodegradable and anti-bacterial polyurethane coating for biomedical magnesium rods.

Surface modification of biomedical Mg with functional polymers coatings is an effective and simple strategy to improve the corrosion resistance and anti-bacterial property. Herein, we develop a novel biodegradable and anti-bacterial polymer coating for Mg rods. A key feature of our approach is to treat the Mg rods with polyurethane, a widely used coating material with strong structural controllability and good film-formation property. Polyurethanes (PU) functionalized by polyethylene glycol (PEG) chains (GPU) and zwitterions (ZPU) were firstly synthesized and subsequently applied to fabricate coatings on Mg-based rods. Scanning electron microscopy (SEM) result demonstrates that a homogeneous and dense layer with a thickness of ~4-15 µm is readily formed on the substrates by dip-coating method. We first investigated how PU coatings would affect their resulting corrosion behaviors by the electrochemical corrosion test, surface morphology examining and element analysis of the immersed samples. Then, we evaluated their protection capabilities and the relationship to Mg2+ ion release and pH value alteration under the physiological conditions. Results show that the corrosion resistance of Mg rods is improved appreciably after coating with the synthesized PU polymers. More importantly, the functionalized PU exhibit enhanced antibacterial performance and excellent blood compatibility. In particular, ZPU-12 not only successfully improves the corrosion resistance of substrates, but also produces an antimicrobial coating for preventing bacterial attachment. The application of these functionalized PU coatings for the surface modification of biomedical Mg-based alloys can provide a practical and potential strategy to expedite their clinical acceptance.

Poly(l-lactic acid) (PLLA) Coatings with Controllable Hierarchical Porous Structures on Magnesium Substrate: An Evaluation of Corrosion Behavior and Cytocompatibility.

Magnesium (Mg) and its alloys have been intensively explored as the next generation of metallic bone substitutes in past decades, but their rapid corrosion rate in physiological environments is still a great hindrance for further therapeutic applications. In the present study, we attempt to design biodegradable poly(l-lactic acid) (PLLA) coatings on pure Mg substrates (99.99 wt %) with tunable surface morphologies through dip-coating in combination with mixed nonsolvent induced phase separation (Dip-coating-mNIPS) method to regulate their corrosion behavior and biocompatibility. We applied the mixtures of ethanol and hexane as the coagulation baths, and changed the composition of mixed nonsolvent and the concentration of polymer solution to obtain PLLA coatings with different pore sizes and morphologies. Standard electrochemical measurements and immersion tests demonstrated that all PLLA coatings could effectively enhance the corrosion resistance of Mg substrates but that the corrosion behaviors varied among coatings with different surface and inner structures. A systematic investigation of cellular response through MTT assay, LIVE/DEAD staining, cell distribution, and cell attachment indicated that PLLA-coated Mg substrates could enhance cytocompatibility in comparison to pure Mg. In addition, the cellular behaviors were affected by the corrosion activity as well as the surface properties of different PLLA coatings. Our findings illustrated that through the Dip-coating-mNIPS method, the structure of the PLLA membrane on Mg substrates could easily be controlled to regulate the corrosion behaviors and further improve the biocompatibility. This presents great potential in designing functional polymer coatings on Mg-based orthopedic implants to meet specific clinical requirements.

Biodegradable Poly(l-lactic acid) (PLLA) Coatings Fabricated from Nonsolvent Induced Phase Separation for Improving Corrosion Resistance of Magnesium Rods in Biological Fluids.

Magnesium (Mg)-based biometals are increasingly becoming a promising candidate of the next-generation implantable materials due to their unique properties, such as high biocompatibility, favorable mechanical strength, and good biodegradability in physiological conditions. However, the swift corrosion of Mg, resulting in early loss of structural support, has posed an enormous challenge in clinical application of Mg-based implants. To overcome these limitations, herein we developed a novel method, which combines the traditional dip-coating with nonsolvent induced phase separation (NIPS), to fabricate biodegradable PLLA coatings with controlled membrane morphology on pure Mg rods. Unlike the conventional dip-coating, where the polymer solution on the Mg substrates is left to evaporate directly under proper atmosphere, in NIPS, the polymer solution on the substrates is not left to dry but immersed in a nonsolvent of the PLLA, leading to the precipitation of polymer networks. Our results demonstrated that various polymer coatings with different morphologies and inner structures could be easily fabricated by a careful selection of nonsolvents. In comparison to dense PLLA coatings obtained from conventional solvent evaporation, PLLA coatings with a dense surface and porous inner structure were obtained when hexane and petroleum ether were used as the nonsolvents, while PLLA coatings with a completely porous structure were obtained when polar acetone and ethanol were chosen. The electrochemical corrosion tests and immersion tests further showed that all polymer coatings could significantly improve the corrosion resistance and suppress the corrosion rates of the substrates. However, PLLA films obtained via NIPS had much lower pH changes and slower Mg2+ release, implying better protective effects of the fabricated coatings. Based on results of all experiments, a new process for the corrosion mechanism of Mg implants during immersion has also been proposed in this work.

An innovative Mg/Ti hybrid fixation system developed for fracture fixation and healing enhancement at load-bearing skeletal site.

Magnesium (Mg) is a potential biomaterial suitable for developing biodegradable orthopaedic implants, especially as internal fixators for fracture fixation at non-load bearing skeletal sites. However, Mg alone cannot provide sufficient mechanical support for stable fracture fixation at load bearing sites due to its rapid degradation in the early stage after implantation. In consideration of the strengths and weaknesses of Mg, we developed an innovative magnesium/titanium (Mg/Ti) hybrid fixation system for long bone fracture fixation and investigated the fixation efficacy. The finite element analysis (FEA) results indicated that the Mg/Ti hybrid fixation system provided sufficient mechanical support for fracture fixation at load-bearing skeletal site. As a proof-of-concept, we performed a "Z-shaped" open osteotomy at the mid-shaft of rabbit tibia. For comparison, the animals were divided into two groups: Mg/Ti group (fixated with Mg screws and Ti fixators) and Ti control group (fixated with Ti screws and Ti fixators). The radiographic, four-point bending mechanical test, histological and histomorphometric analysis were postoperatively performed in a temporal manner up to 12 weeks. Both X-ray and micro-CT images of the Mg/Ti group showed a larger callus (14.7% at 3rd week and 24.8% at 6th week, n = 5-7, p < 0.05) in the regions of interest (ROIs) over time, especially at the opposite cortex of the fixation plate. At the 12th week post-operation, the biomechanical test result indicated that the rabbit tibia in the Mg/Ti group healed better and the overall mechanical strength was approximately 3-fold higher (n = 8, p < 0.05) than that at 6th week. Furthermore, the FEA revealed that the Mg/Ti group had a higher mechanical strength (19.5% at week 6 and 31.5% at week 12) at the specified ROI and resulted in an earlier and faster endochondral ossification (68.0% at week 3 and 71.4% at week 6) with a higher expression of osteocalcin (54.0%) and collagen I (34.2%) than the Ti control group (n = 4, p < 0.05). Further evaluation suggested that a higher expression of calcitonin gene-related peptide (CGRP), a known osteogenic neuron peptide, in the fracture callus of the Mg/Ti group might be a major underlying mechanism of enhanced fracture healing attributed to the release of Mg ions during the degradation of Mg screws.

Dopamine Polymerization in Liquid Marbles: A General Route to Janus Particle Synthesis.

Coating a liquid with a particle shell not only renders a droplet superhydrophobic but also isolates a well-confined microenvironment for miniaturized chemical processes. Previously, we have demonstrated that particles at the liquid marble interface provide an ideal platform for the site-selective modification of superhydrophobic particles. However, the need for a special chemical reaction limits their potential use for the fabrication of Janus particles with various properties. Herein, we combine the employment of liquid marbles as microreactors with the remarkable adhesive ability of polydopamine to develop a general route for the synthesis of Janus particles from micrometer-sized superhydrophobic particles. We demonstrate that dopamine polymerization and deposition inside liquid marbles could be used for the selective surface modification of microsized silica particles, resulting in the formation of Janus particles. Moreover, it is possible to manipulate the Janus balance of the particles via the addition of surfactants and/or organic solvents to tune the interfacial energy. More importantly, owing to the many functional groups in polydopamine, we show that versatile strategies could be introduced to use these partially polydopamine-coated silica particles as platforms for further modification, including nanoparticle immobilization, metal ion chelation and reduction, as well as for chemical reactions. Given the flexibility in the choice of cores and the modification strategies, this developed method is distinctive in its high universality, good controllability, and great practicability.